Product Description:
Enviro 200P Ultra is an ultra-flexible, class III waterproofing membrane designed for internal and external applications, specifically under tiles and for various water tank scenarios. This water-based crosslinked copolymer system, urethane modified, boasts fast-drying properties, exceptional elasticity, excellent adhesion, and outstanding elongation.
Typical Uses:
Enviro 200P Ultra excels in waterproofing walls, floors, decks, and roof areas intended for tiling or other protective coatings. It is also an ideal choice for tank liners in permanent immersion situations, including fire sprinkler tanks, greywater tanks, and stormwater retention tanks.
Suitable Substrates:
Compatible with a range of substrates, including new concrete (cured for a minimum of 28 days), fiber cement sheets (walls, min. 6mm), renders and screeds (cured for min. 7 days), compressed fiber cement (min. 15mm), wet area-grade plasterboard walls (min. 10mm), and wet area-grade plywood (PAA).
Features:
- Fast drying and water-based for easy cleanup.
- Complies with AS:4858 and has very low VOC content.
- Excellent vertical hold-up and crack-bridging ability.
- Single-component application, no reinforcing fabric required.
- Modified polyurethane prevents re-emulsification.
- Compatible with ceramic tile adhesives such as Enviro GTA and Enviro GTX.
Application Guidelines:
Apply Enviro 200P Ultra using a brush, roller, or squeegee in 2 coats to the required Dry Film Thickness (DFT). Ensure application temperatures are no less than 10°C or no more than 35°C, with humidity not exceeding 85% RH. For shower areas, guarantee a sufficient coating thickness, free of defects like pinholes. Follow minimum application requirements set by the NCC and relevant Australian Standards. The product is suitable for use over particle board.