Product Description:
Aqua Mix® ProBlock is the ultimate solution for preserving the beauty of porous stone and tile surfaces. This water-based penetrating pre-sealer is not just economical but also boasts a natural look, ensuring your surfaces retain their original charm. ProBlock is specifically designed to resist staining caused by water-soluble minerals, including the notorious picture framing effect that occurs during installation.
Key Features:
- Ideal for six-sided pre-sealing (dip-sealing)
- Allows moisture vapor transmission
- Excellent as a grout release
- Not an adhesive bond breaker
- Safe to use, water-based, low VOC
For Use On:
Use ProBlock as a pre-sealer or grout release for a variety of natural stones, including granite, basalt, marble, limestone, sandstone, bluestone, travertine, slate, etc. Additionally, it is suitable for concrete pavers, brick, and masonry, offering versatility for both interior and exterior applications.
Important Note:
When applying ProBlock, treat the sealed underside surface as a low porosity dense surface. It reduces the porosity of the underside sealed surface. For proper installation on low porosity dense surfaces, consult your adhesive supplier for the appropriate adhesive specification. Thoroughly wet out the sealed underside surface and substrate with the adhesive before application, ensuring proper coverage and adhesion. Follow the adhesive manufacturer’s recommendations for the most suitable adhesive.
Preserve the integrity of your porous stone and tile with Aqua Mix® ProBlock – the pre-sealer that goes beyond protection to maintain the natural beauty of your surfaces. For specific installation guidance, consult with your adhesive supplier and follow industry recommendations for optimal results.
Coverage
Approximately 4 m2 – 14 m2, per litre, per coat when applied to all 6 sides, depending on type of surface porosity, surface temperature, humidity and method of application.
