Drizoro Maxseal-Flex 2 Part Waterproof Membrane

NO primer is required except in areas where salt treatment has been carried out.

Drizoro Maxseal Flex Description:

MAXSEAL FLEX is a two-component product. Component “A” is a water-based special acrylic resin and component “B”, is a mortar based mixture of special cements, additives and well-graded aggregates. Once applied and cured, MAXSEAL FLEX provides a non-toxic, flexible and waterproof coating with very high adhesion on those common substrates in construction- concrete, natural and traditional mortar plasters, blocks, Hebel etc.

Maxseal Flex Application Fields:

• Waterproofing and protection of water retaining structures, such as drinking water tanks, reservoirs, water mains and swimming pools.
• Waterproofing of below-grade structure like basements, retaining walls, foundations, tunnels, galleries subjected to both positive or negative high water pressure.
• Internal and external waterproofing and protection of new and old buildings, façades against dampness, rain, pollution and aggressive environment.
• Waterproofing and protection of concrete against carbonation, and chlorine penetration in public works, irrigation channels, dams, retaining walls and water treatment plants, bridges, etc.
• Tile fixing and waterproofing of roofs under tiles and pavement in terraces, balconies, bathrooms, kitchens and other wet rooms in hotels, hospitals, offices and residential buildings, in indoor or outdoor use.
• Waterproofing of window boxes, gardens and other surfaces subject to root penetration. Water retention structures.

Maxseal Flex Advantages:

• Provides a fully flexible coating which ensures complete waterproofing in the most severe conditions, even in high negative or positive water pressure.
• Covers shrinkage and hairline cracks in the concrete.
• Acts as an anti-fracture membrane between the substrate and other finishing coats.
• Excellent protection for concrete, being both a CO2and chlorine (Cl-) barrier and thereby preventing carbonation and electrochemical corrosion.
• Permeable to water vapour, allows the substrate to breathe.
• Resistant to abrasion and is UV stable.
• Withstands atmospheric pollution, corrosive effects of salt water and freeze/thaw cycles.
• Resists hydrostatic negative and positive pressure from groundwater when used for interior underground applications.
• Excellent adhesion and easy to use. Does not require bonding agents and can only be applied on wet surfaces.
• Non-toxic and chloride free. Suitable for contact with potable water.
• Longer lasting than other coatings, NO maintenance costs.
• Environmentally friendly.
• At shore hardness of 85 (23mpa) considered insect and TERMITE proof..

Caution:

• DO NOT APPLY USING ROLLERS•
  Mixing ratio of 2.5 Kg powder to 1 litre Liquid, do not add water, cement, admixtures, sand or any other compound.
  In case of doubt related to the kind of Liquid or other products NOT specified in this TDB Please contact with MAXSEALFLEX
• We do NOT recommend the use of Maxseal flex over ZINC or ZINC coated surfaces, treat these surfaces using Maxrest Passive as per TDS prior to coating.
• Maxseal flex cannot be used as a finish coating on swimming pools.

Apply a flick coat of 3parts cement and 1 part of sand no later than 24 hours after application of the second coat ,allow to cure minimum of 3 days prior to the application of finishing surfacing.