Drizoro Maxseal-Foundation waterproof membrane

NO primer required except in areas where salt treatment has been carried out.

Product Description:

MAXSEAL FOUNDATION is a cement based product with special additives and aggregates to provide total waterproofing protection to most commonly used construction substrates like concrete, bricks and blocks. Maxseal Foundation will seal against positive and negative water pressures, due to its high resistance to aggressive waters.

Product Uses:

• Waterproofing of retaining walls, car parks, basements, elevator pits, below grade ingress of water in foundations.
• It can also be used as waterproofing layer or barrier against humidity by capillarity on a variety of mortar substrates.

Product Advantages:

• Good adhesion, it becomes part of the substrate , fills and seals all pores, missing mortar lines etc.
•  Must be applied to wet surfaces
• Can be sprayed by airless sprayer (3 to 5mm tip)
• Can be rendered or painted over.
• NOT affected by salts and acids in soil.
• Easy to apply with Drizoro brush.
• Will seal against positive and negative water pressure.

Important Notice:

• Surface preparation: The surface to be coated must be sound, clean, free of traces of paint, loose particles, dust, grease, mould release compounds, gypsum, efflorescence.
• IT IS THE APPLICATORS RESPONSIBILITY to determine the presence of (salt) efflorescence prior to application.
• Remove efflorescence using SALTRID and apply SEALTIGHT to the affected areas to block salt from penetrating.

IMPORTANT:

• Maxseal Foundation can only be applied to a wet surface, NO other primer or OTHER product is required except in areas where salt treatment has been carried out.
• Apply Maxseal Foundation in these areas while surface is
  still wet with SEALTIGHT.
• Concrete and masonry foundation walls subject to extreme
  pressures and water aggressiveness.
  please contact office.

CAUTION:

• DO NOT apply in excess of 2 layers.
• DO NOT apply to bitumen or polyurethanes.
• DO NOT place plastic or core flute protection boards against treated surfaces prior to back filling.
• Drainage cell and aggregate can be placed.