Drizoro Maxseal trafficable membrane

Primerless- No primers or Bonding Agent needed.

Drizoro Maxseal Traffic Description:

MAXSEAL® TRAFFIC is a two-component mortar based on special cements and water-based synthetic resin. It is easily applied by brush, roller or spray equipment to provide a suitable trafficable coating for waterproofing on positive and negative pressure of concrete floors exposed to car or industrial traffic.

Maxseal Traffic Application Fields:

• Waterproofing underground parking, garages, horizontal decks, ramps and other surfaces exposed to wheel traffic.
• Waterproofing of slab-on-grade and concrete floors against raising damp and negative water pressure in warehouses, factories, residential buildings, etc.
• Waterproofing of basements, tunnels, galleries, etc., subject to high water pressure and high wearing abrasion.
• Line marking coating with anti-slippery finish, zebra crossing, emergency lines, etc.

Maxseal Traffic Advantages:

• Waterproofing and traffic bearing coating in one single product.
• Very high waterproofing/damp proofing performances. Withstands both positive and negative hydrostatic pressure.
• Excellent abrasion-resistant coating to wheel traffic: cars, forklifts, industrial vehicles, etc.
• Very good water vapour diffusion, thereby it does not form a water vapour barrier and prevents appearance of air bubbles on floors.
• Strong adhesion directly on concrete; no primers or bonding agents required.
• It is UV-resistant, outdoor colour-stability.
• High resistant exposed to chloride, de-icing salts, freeze-thaw cycles, atmospheric pollution, etc.
• Easy to use and no maintenance required.
• Final fine-textured coating of MAXSEAL ® TRAFFIC can be worked in different decorative finishes: smooth, anti-slippery, roller, etc.
• Solvent-free, odour-free, non-flammable, nontoxic, environmentally friendly. Suitable for application in poor ventilated areas.

• Do not add cements, additives or aggregates to MAXSEAL ® TRAFFIC.
• Observe both minimum and maximum consumption figures recommended per coat.
• Apply only on concrete substrates. Do not apply on old coatings, bituminous/asphalt substrates, etc.
• For other applications not specified on this Technical Bulletin or further information, consult our Technical Department.