TECHNICAL DATA:
Type of material: rubber sandwiched between two layers of non-woven polypropylene fabric.
Thickness: 0.68 mm.
Width: 130 mm.
Tensile strength: 45 N/15 mm.
Elongation at failure: 315 %.
EMICODE: EC1 Plus – very low emission.
Packaging:
– 30 m long by;
– 10 m long by;
– 90° and 270° angular pieces.
– templates to make through holes (200 x 200 mm and 400 x 400 mm).
WHERE TO USE
• Waterproofing corners between adjacent walls and between walls and floors.
• Waterproof elastic control joints on terraces, balconies, etc.
TECHNICAL CHARACTERISTICS
Mapeband Easy is made from a central core of vaporproof and waterproof elastic rubber sandwiched between two layers of alkali-resistant, non-woven polypropylene fabric.
Mapeband Easy is elastic and deformable and has a series of holes along the edges to improving wetting with the waterproofing product applied.
Mapeband Easy is used in combination with various waterproofing products, such as products from the Mapelastic range, Monolastic, Mapegum WPS and products from the Aquaflex Roof range.
ADVANTAGES
• Highly elastic with elongation at failure of more than 300%.
• Easy to apply thanks also to the holes along the edges.
• Thanks to the seamless outer layers of non-woven fabric, joints between different pieces of tape may be formed directly with the chosen waterproofing product.
• May be coated with the chosen waterproofing product or with the adhesive used to bond floor or wall coverings.
RECOMMENDATIONS
• To form a perfect seal in corners and around edges, use the special, pre-formed 90° and 270° pieces from the Mapeband Easy range.
• To form a perfect seal around pipework, use the special Mapeband Easy templates.
